The
AP-3 Heavy Cannon is designed as a direct or indirect fire weapon to propel
paint loads accurately and to further ranges than any other co2 cannon yet
released by Alternative Paintball. The new AP-3 uses a 2" PVC barrel of
about 3 foot length, approx. 18 inch expansion chamber with 3/4" diameter
and a high flow 3/4" firing valve. In addition, the AP-3 includes an
adjustable webbing rifle sling. The AP-3 Heavy Cannon can use any co2
source for power. Constant air, 12 grams, remote line, etc. Ammunition can
be paintballs, water balloons filled with paint or other low mass
projectiles that are suitable for paintball use. The AP-3 comes with a
constant air adapter. Many options are available to customize your
mortar. The 1200psi pressure gauge shows you pressure charge at a glance.
Use the gauge to judge shot distances. The AP-3 Heavy Cannon has been
tested with 3" Water balloons and plastic cup packing wads. Ranges are in
excess of 250' at a nominal 400 psi co2 pressure. This baby cooks! Close up of
valve/feed mechanism
The
AP-3 Heavy Cannon is designed as a direct or indirect fire weapon to propel
paint loads accurately and to further ranges than any other co2 cannon yet
released by Alternative Paintball. The new AP-3 uses a 2" PVC barrel of
about 3 foot length, approx. 18 inch expansion chamber with 3/4" diameter
and a high flow 3/4" firing valve. In addition, the AP-3 includes an
adjustable webbing rifle sling. The AP-3 Heavy Cannon can use any co2
source for power. Constant air, 12 grams, remote line, etc. Ammunition can
be paintballs, water balloons filled with paint or other low mass
projectiles that are suitable for paintball use. The AP-3 comes with a
constant air adapter. Many options are available to customize your
mortar. The 1200psi pressure gauge shows you pressure charge at a glance.
Use the gauge to judge shot distances. The AP-3 Heavy Cannon has been
tested with 3" Water balloons and plastic cup packing wads. Ranges are in
excess of 250' at a nominal 400 psi co2 pressure. This baby cooks!