The Constant Air Paintball Cannon
This cannon design includes a feature many players have requested - a C/A hookup. Our C/A cannon is similar in design to the other cannons with the exception of the gas feed.
Our design uses the correct adapter needed to screw a CA tank(3oz-20oz) to the cannon.
An on/off type valve is suggested to be used on the tank, but this is not necessary. The reason for this is when you fire the cannon, the CA tank will keep spewing co2 until you close the 1/4 turn valve on the cannon. You will lose allot of co2 this way if you are not quick enough. An on/off valve will allow you to charge the cannon, turn off the co2 supply, then fire the cannon, without any further co2 lost from the c/a tank.
The C/A cannon has a few nifty features. A butt plate stock on the rear, which enables you to store extra packing wads internal to the gun, where they are readily available, a totally enclosed firing valve and expansion chamber, which adds to the aesthetics and protects the internals, a 2" barrel that can hold lots of paint, a webbing gun sling and a forward C/A tank design (like the VM-68). This forward design make the cannon more compact.
The C/A cannon has a few nifty features. A butt plate stock on the rear, which enables you to store extra packing wads internal to the gun, where they are readily available, a totally enclosed firing valve and expansion chamber, which adds to the aesthetics and protects the internals, a 2" barrel that can hold lots of paint, a webbing gun sling and a forward C/A tank design (like the VM-68). This forward design make the cannon more compact.